Heavy plastic dispensing trays are fabricated with 1/4” thick high density polyethylene. All welded construction featuring a spigot with 0.625" spout O.D. that will lock in the open position when the tab is flipped up, or can be used alternately by holding down the tab.
Plastic dispensing trays are supplied with polypropylene dispensing valve located as close to the tray bottom as possible, but can be in other locations upon request. Dimensions listed are inner (I.D.). The spigot goes in a thru-hole in the tray and secures to itself with a nut. The 3/4"-16 UNF thread is 1" long. Gasket seal on both sides, made of rubber.
Plastic spill containment trays can be customized with spigots and covers which are fabricated to order.
108884
|
-1 |
-2 |
-3 |
-4 |
-5 |
-6 |
| Length inches |
12 |
16 |
18 |
22 |
18 |
18 |
| Width inches |
16 |
20 |
22 |
26 |
18 |
24 |
| Depth inches |
3 |
4 |
4 |
4 |
6 |
6 |