Pipettor holders are made from clear acrylic or high density polyethylene. This pipettor holder accommodates most major brands of pipettors making it a useful addition to any laboratory. The pipettor holder comes in three standard sizes for 3, 4 or 6 pipettors.
The upper rack has 26.1mm (1.02”) slots. The lower rack has 16mm (.625”) slots. All pipettor holders are supplied with non-skid feet.
| Description |
4 place |
6 place |
4 place |
6 place |
3 place |
| Material |
Acrylic* |
Acrylic* |
HDPE |
HDPE |
Acrylic |
| Height inches |
12 |
12 |
12 |
12 |
12 |
| Depth inches |
8 |
8 |
8 |
8 |
8 |
| Width inches |
8 |
12 |
8 |
12 |
6 |
Important Cleaning Note: Should the acrylic surfaces of acrylic products need cleaning, DO NOT USE ANY SOLVENTS OR ABRASIVES (alcohol, acetone, etc...) USE OF THESE MATERIALS WILL CAUSE CRACKING OR CRAZING OF THE ACRYLIC. For general cleaning wash the surface with a mild detergent and soft cloth, then rinse thoroughly with clean water.
* California Proposition 65 Warning Acrylic
 |
WARNING: This product can expose you to chemicals including 2-Propenoic acid, ethyl ester which are known to the state of California to cause cancer. For more information: www.p65warnings.ca.gov
|