Plastic test tube supports for 10, 13 and 16 mm tubes. Acrylic tube racks have 1/8" tick clear shelves with 3/4" thick white sides and bases. Plastic test tube racks are sturdy and allow for good sight lines to test tubes.
Fabricated in our on-site custom fabrication shop, this series of test tube supports can be customized to an size and configuration required. Standard lead time for custom product is 4 to 6 weeks depending on shop resources.
| 159505 |
-02 |
-10 |
| Holds # of Tubes |
18 |
18 |
| Tube Size mm |
13 |
16 |
| Length inches |
5.75 |
6.5 |
| Width inches |
3.0 |
3.5 |
| Height inches |
2.5 |
2.5 |
Important Cleaning Note: Should the acrylic surfaces of acrylic products need cleaning, DO NOT USE ANY SOLVENTS OR ABRASIVES (alcohol, acetone, etc...) USE OF THESE MATERIALS WILL CAUSE CRACKING OR CRAZING OF THE ACRYLIC. For general cleaning either use SLIDE Foamaction Plastic Cleaner or wash the surface with a mild detergent and soft cloth, then rinse thoroughly with clean water.
 |
WARNING: This product can expose you to chemicals including 2-Propenenitrile, 2-Propenoic acid, ethyl ester and Titanium oxide (TiO2) which are known to the state of California to cause cancer, birth defects and other reproductive harm. For more information: www.p65warnings.ca.gov
|